Magnum ME-AGS-N Generator Auto Start Module Network Version

The ME-AGS-N is an Automatic Generator Start for Network Versions from Magnum Energy.

• Automatically start your generator - The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature.
• Adjust the AGS to meet your needs - With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC, the ME-AGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.**

This AGS is set up and operated via a Magnum Energy inverter and remote control (i.e., ME-RC, ME-ARC, or ME-RTR). Using the AGS, your generator can automatically start and stop based on the following conditions:

• Battery Voltage: Continuously monitors battery voltage. Autostarts the generator when the battery voltage falls to a certain level, and autostops the generator when the battery voltage either rises to a higher level or goes into the Float Charge stage – depending on the remote control.

• Time of Day: Starts and stops the generator daily based on selectable start/stop times (determined by the time on the remote control’s clock).
• Inverter Load Amps: Starts/stops the generator based on the loads powered by the inverter (assists inverter with larger loads). Note: Only applicable to MS-PAE and MS-PE Series Magnum inverters.
• Rising Temperature: Continuously monitors the temperature of the surrounding area and automatically starts the generator whenever power is needed to run an air conditioner or to cool down an area.
• Battery SOC: Monitors your battery system and automatically starts the generator when the battery requires charging – based on the actual SOC (State of Charge) of the battery.

Note: Battery SOC is a more accurate method than using battery voltage as a criterion to determine when a battery requires charging.

Info: The SOC autostart/autostop feature requires the optional ME-BMK or ME-BMK-NS (Battery Monitor Kit) accessory to accurately determine the battery’s SOC

For use with the following remote controls:

• ME-RC Revisions 1.5 - 2.612
• ME-ARC Revisions 2.0 - 2.4
• ME-RTR Revisions 2.1 - 2.2