MTI Industries 62-542-WT-Marine Safe T Alert 62 Series Marine Flush Mount Carbon Monoxide Alarm

This is the Safe T Alert 62 Marine Flush Mount Carbon Monoxide Alarm from MTI Industries.

• NMMA Listed Component.
• Space Saving design works in harsh marine environment.
• Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor.
• No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut off alarms available.
• Low Current Draw (37 mA). Innovative micro current circuit saves battery power for the boater.
• Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO.
• End of Life Signal alerts boater to replace the alarm after 5 years of service.
• Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
• Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.

Certification: ANSI / UL STD 2034*

Testing Laboratory: ETL/Intertek

Alarm Point: 400 PPM 4-15 Minutes

Low voltage power warning at 7 Volts

Power Supply and Current Draw: 37 mA @ 13.8 VDC

Operational Range: 13.8 Volts +/-15%

Low voltage power warning at 7 Volts

Operating Temperature: -40°F to +158°F

Case Size: 4.5″W x 3.25″H x 1.25″D

Warning: Product may contain materials cautioned by California Proposition 65