Spyder 18pc Hole Saw Set Tungsten Carbide Tipped TCT 600938

This is the 18-Piece Tungsten Carbide Tipped Hole Saw Kit with Case 600938 from Spyder. Ideal for cutting wood, MDF, plywood, fiber cement board, porous concrete block, some brick, ceramic wall tile, plastic, PVC and more. This set features 3/4", 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 2-5/8", 3", 3-5/8", 4-1/8", 4-1/2" sizes in a hard-plastic case.

• Up to 10x more cuts and up to 5x faster than standard bi-metal hole saws
• Spyder’s Rapid Core Eject arbor system ejects cores without prying, quickly changes diameter, cuts at an angle, and enlarges existing holes
• Drill wood, MDF, plywood, fiber cement board, porous concrete block, some brick, ceramic wall tile, plastic, PVC and more
• Tungsten carbide tipped for extended life, clean cuts and extreme material drilling versatility
• Universal thread uses Spyder arbor/pilot bits or other universal hole saw arbors
• Maximum cut depth of 2-3/8-in
• Not for drilling metal, wood with nails, or in block/brick/tile applications with a Mohs hardness of 6 or greater
• Always use a drill motor with a support handle in standard rotary drilling mode only
• Not for use in hammer mode

Outside Diameter: 3/4", 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 2-5/8", 3", 3-5/8", 4-1/8", 4-1/2"
Arbor Hex Size: Hex8/TCT/HSS, Hex10/TCT/HSS

WARNING: To reduce the risk of injury, read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, protective apparel and hearing protection should be used in appropriate conditions to reduce the risk of personal injury

WARNING: HOLE SAWS ARE NOT TO BE USED IN HAMMER OR IMPACT MODE! Only drill in standard rotary drilling mode. Drilling in hammer or impact mode can cause the hole saw to become damaged/broken and can increase the likelihood of user injury due to dangerous flying debris or other unsafe situations.

WARNING - California Proposition 65: Drilling, sawing, sanding, or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to: www.P65Warnings.ca.gov/wood.