Spyder 4-3/8" O.D. 6.5" Deep Cut TCT, Hole Saw, Carbide Tipped 600835

This is the 4-3/8” Tungsten Carbide Tipped Non-Arbored 6.5" Deep Cut Hole Saw 600835 from Spyder. Ideal for cutting wood, fiber cement board, porous concrete block, brick, ceramic wall tile, plastic/PVC and more.

• Up to 10x more cuts than standard bi-metal hole saws
• 6-1/4-In depth of cut
• Drill wood, fiber cement board, porous concrete block, brick, ceramic wall tile, plastic/PVC and more
• Universal 5/8-18 thread uses Spyder Hex11 arbor/pilot bits
• Tungsten carbide tipped for extended life, clean cuts and extreme material drilling versatility
• Always use a drill motor with a support handle
• Not for use on metal, wood with nails, or in block/brick/tile applications with a Mohs hardness of 6 or greater
• Not for use in hammer mode

WARNING: To reduce the risk of injury, read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, protective apparel and hearing protection should be used in appropriate conditions to reduce the risk of personal injury

WARNING: HOLE SAWS ARE NOT TO BE USED IN HAMMER OR IMPACT MODE! Only drill in standard rotary drilling mode. Drilling in hammer or impact mode can cause the hole saw to become damaged/broken and can increase the likelihood of user injury due to dangerous flying debris or other unsafe situations.

WARNING - California Proposition 65: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to: www.P65Warnings.ca.gov/wood.